DevTools:conf Files

From CrossWire Bible Society
Revision as of 12:03, 22 June 2011 by David Haslam (talk | contribs) (Elements to indicate features: <references />)

Jump to: navigation, search

Creating a .conf File

.conf File Layout

The conf file tells the SWORD engine how to treat installed module files, etc. which kind of markup they contain, and so forth.

Below is a listing of the possible directives in that file. Each of these directives of the form key=value. Some keys can be repeated. Some can have values that span more than 1 line with '\' at the end of a line indicating that the text on the next line continues the value. Some values allow RTF and some allow HTML <a href="xxx">label</a>hypertext links. HTML is not allowed otherwise.

Note on RTF, only the following are allowed:

  • \qc - for centering
  • \par - for paragraph breaks
  • \pard - for resetting paragraph attributes, i.e. turning off centering.
  • \u{num}? - for unicode characters, where {num} is a signed, 16-bit representation of the code point and where ? is the ASCII character used in case unicode is not supported. If the {num} is less than 0 then add 65536 to it. This should only be used in modules that have an Encoding=UTF-8, but using the actual UTF-8 character is preferred.

Enumerated values are shown in bold. These should be used exactly as given and no other values should be used.

Required Elements

Element Values (type or enumerated) Default Value Allows
[name] Each conf file begins with [name], replacing "name" with a short well known abbreviation for the module (e.g., [KJV]). This must be first in the file. Valid characters for this abbreviation are limited to A-Z, a-z, 0-9 and _.

The .conf file should be named the lowercase of this abbreviation followed by .conf. For example, [MyModule] would be mymodule.conf.

   
DataPath <relative system path pointing to the data files>

DataPath is the path to the module data files relative to the SWORD module library root directory. This path should start with "./modules". If the DataPath indicates a directory it should end with a '/'. Otherwise the module name is both the directory and the prefix for each file in that directory. Although DataPath can point to any folder or files under the root of the SWORD module library, the following conventions are recommended and must be used for modules wishing to be included in a CrossWire repository:

Paths for a module named [mymodule], depending on the type of module (Bible text, commentary, lexcon or dictionary, general book) and the data driver used are:

./modules/texts/rawtext/mymodule/
./modules/texts/ztext/mymodule/
./modules/comments/zcom/mymodule/
./modules/comments/hrefcom/mymodule/
./modules/comments/rawcom/mymodule/
./modules/comments/rawcom4/mymodule/
./modules/comments/rawfiles/mymodule/
./modules/lexdict/zld/mymodule/mymodule
./modules/lexdict/rawld/mymodule/mymodule
./modules/lexdict/rawld/devotionals/mymodule/mymodule
./modules/lexdict/rawld/glossaries/mymodule/mymodule
./modules/lexdict/rawld4/mymodule/mymodule
./modules/genbook/rawgenbook/mymodule/mymodule
   
Description <string>

This is a short (1 line) title of the module.

   
ModDrv RawText (for uncompressed Bibles)
zText (for compressed Bibles)
RawCom (for uncompressed Commentaries)
RawCom4 (for uncompressed Commentaries having entries greater than 32K bytes)
zCom (for compressed Commentaries)
HREFCom (each module entry must be only a URL to the body for the entry; experimental)
RawFiles (stores each entry in a simple text file in the datapath; recommended for Personal Commentary)
RawLD (for uncompressed Dictionaries)
RawLD4 (for uncompressed Dictionaries having entries greater than 32K bytes)
zLD (for compressed Dictionaries)
RawGenBook (for uncompressed tree keyed modules)
   

Elements to indicate features

Element Values (type or enumerated) Default Value Allows
CompressType ZIP
LZSS

Used to indicate how a compressed module (zText, zCom, zLD) is compressed. ZIP is the preferred format.

LZSS  
BlockType BOOK
CHAPTER
VERSE

Used for zText and zCom to indicate how much of the work is compressed into a block. The trade off is size for speed, with BOOK taking the least overall space and the longest time and VERSE taking the greatest overall space and the least time. While BlockType has a default, it is a best practice to specify it. Most Bibles use BOOK and larger Commentaries use CHAPTER. To date, no module uses VERSE.

CHAPTER  
BlockCount <integer>

Used for zLD to indicate the number of entries in a compressed block. Higher values will make the module slower, but smaller.

200  
KeyType TreeKey
VerseKey

Used for RawGenBook to indicate whether the module contains a book or a Bible. At this time VerseKey is not yet supported and is being developed as a solution for Bible's which do not conform to any supported versification system in SWORD. See alternate versification.

TreeKey  
CipherKey <string>

Contains the unlock key for enciphered modules. A good key is something that is hard to guess. Typically in a format matching the pattern: /[0-9]{4}[A-Za-z]{4}[0-9]{4}[A-Za-z]{4}/. Internally the key can be any byte sequence from 1 to 255 bytes in length. But this file needs it to be readable, plain text, without leading or trailing spaces. Leave a blank line ("CipherKey=") to indicate that the module is enciphered but has no unlock key. (Omit for unlocked modules.)

   
Versification Catholic
Catholic2
German
KJV
KJVA
Leningrad
Luther
MT
NRSV
NRSVA
Synodal
SynodalP
Vulg

Used to specify the versification employed by a Bible module.

KJV  


Elements required for proper rendering

Element Values (type or enumerated) Default Value Allows
GlobalOptionFilter GBFStrongs (For GBF texts having Strong's Numbers)
GBFFootnotes (For GBF texts having footnotes)
GBFMorph (For GBF texts having morphology information)
GBFHeadings (For GBF texts having headings)
GBFRedLetterWords (For GBF texts marking the Words of Christ)
ThMLStrongs (For THML texts having Strong's Numbers)
ThMLFootnotes (For THML texts having footnotes)
ThMLScripref (For THML texts having cross references)
ThMLMorph (For THML texts having morphology information)
ThMLHeadings (For THML texts having headings)
ThMLVariants (For THML texts having variant readings)
ThMLLemma (For THML texts having lemmas)
UTF8Cantillation (For Hebrew texts having cantillation marks)
UTF8GreekAccents (For Greek texts having accents)
UTF8HebrewPoints (For Hebrew texts having vowel points)
OSISStrongs (For OSIS texts having Strong's Numbers)
OSISFootnotes (For OSIS texts having informational notes)
OSISScripref (For OSIS texts having cross reference type notes)
OSISMorph (For OSIS texts having morphology information)
OSISHeadings (For OSIS texts having non-canonical headings)
OSISVariants (For OSIS texts having variant readings)
OSISRedLetterWords (For OSIS texts marking the Words of Christ)
OSISLemma (For OSIS texts having lemmas)
OSISRuby (For Japanese OSIS texts with ruby: Kana glosses of Han characters)

Each of these filters removes/hides the text's feature, when activated by the application. These filters are applied in the order that they are listed in the conf. Some filters are dependent on each other for certain features - e.g. crossreferences in notes require both the OSISFootnotes and the OSISScriprefs filters enabled.

  Repeats
Direction LtoR (Left to Right)
RtoL (Right to Left)

Indicate whether the language's script is a left to right script or a right to left script. Languages such as Hebrew, Arabic, Urdu, and Farsi have a right to left script (technically bi-directional). If the RtoL script is transliterated into a LtoR script, set the value to LtoR.

LtoR  
SourceType Plaintext
GBF General Bible Format: http://www.ebible.org/bible/gbf.htm
ThML Theological Markup Language: http://www.ccel.org/ThML
OSIS Open Scriptural Information Standard: http://www.bibletechnologies.net
TEI Text Encoding Initiative: http://www.tei-c.org/P4X/DI.html

Specifies the markup used in the module. The preferred markup is OSIS. TEI is preferred for dictionaries until OSIS supports dictionaries.
In SWORD, for modules encoded with ThML, OSIS or TEI, each verse, dictionary entry, and book division needs to be well-formed XML or it will result in display problems in some front-ends.

Plaintext  
Encoding UTF-8
Latin-1 (cp1252; see the warning)

The preferred encoding of texts is UTF-8. UTF-8 modules must be encoded with Normalization Form C (NFC). Latin-1 is defined by Windows Codepage 1252 (cp1252) which is a superset of ISO 8859-1. This encoding indicates how the conf and the module are encoded. Warning: "Latin-1" is an ambiguously used term. See ISO 8859-1 at Wikipedia for technical details; in reality Latin-1 is regularly used as a synonym for ISO-8859-1. Front-end implementors should use "cp1252" or "windows1252" explicitly, not "Latin-1" provided by some programming language libraries.

Latin-1  
DisplayLevel <integer>

Used for General Book module types (these are keyed with a TreeKey table of contents). Indicates the preferred level from a leaf in the tree to display for context. e.g., 1 will only show the requested entry; 2 will show the entry, surrounded by all siblings, etc.

1  
Font <string>

Specify the font to be used for display of the module if it is available. Omit this line to use the default font. Do not make use of font-specific encodings in your documents, but use Unicode instead and the Private Use Area if necessary for codepoints that are not handled by Unicode.

   
OSISqToTick true/false

When set to false indicates that OSIS quote elements without a marker attribute are not to produce a quotation mark. This is useful for languages (e.g. Thai) and texts (e.g. KJV) that do not have quotation marks. It is also useful for modules that mark the "Words of Christ" on a verse by verse basis, when the quote spans more than one verse.

true  
Feature StrongsNumbers (for modules that include Strong's numbers)
GreekDef (for modules with Strong's number encoded Greek definitions)
HebrewDef (for modules with Strong's number encoded Hebrew definitions)
GreekParse (for modules with Greek morphology expansions)
HebrewParse (for modules with Hebrew morphology expansions)
DailyDevotion (for daily devotionals using one of the LD drivers and keyed with MM.DD)
Glossary (for collections of glosses using one of the LD drivers)
Images (for modules that contain images of any type)
  Repeats
GlossaryFrom <xml:lang identifier>

Glossaries map one language to another. This value indicates the language being translated from. See Lang below for a discussion of valid values.

   
GlossaryTo <xml:lang identifier>

Glossaries map one language to another. This value indicates the language being translated to. See Lang below for a discussion of valid values.

   

General informatic and installer elements

Element Values (type or enumerated) Default Value Allows
Abbreviation <string>

A shorter abbreviation which can be displayed instead of the full name. For example, KJV for the King James Version.

The module name.  
About <string>

A lengthier description and may include copyright, source, etc. information, possibly duplicating information in other elements.

  Continuation
RTF
Version <version string>

Gives the module's revision number. Incrementing it when changes are made alerts users of the SWORD Installers to the presence of updated modules. Please start with version 1.0 and increment by 0.1 for minor updates and by larger values for more major updates such as a new text source. Changes to this conf file should also increment the version number. Do not use non-numbers, such as 1.4a or 1.1.3.

1.0  
History_x.x <string>

Used to alert users to what has changed between different versions. Each time a version is incremented a history line with that version number should explain the change.

  Repeats
MinimumVersion <version string>

Identifies the minimum version of the SWORD library required for this module.

1.5.1a  
Category Daily Devotional (for modules with Feature=DailyDevotion)
Glossaries (for modules with Feature=Glossary)
Cults / Unorthodox / Questionable Material
Essays (for essays)
Maps (for modules that primarily consist of maps)
Images (for modules that primarily consist of images)
Biblical Texts (for Bibles)
Commentaries
Lexicons / Dictionaries
Generic Books (for anything else....)

This is used by installers to further categorize the modules beyond what can be figured out by the ModDrv and Feature.

Biblical Texts (for /(Raw|z)Text4?/)

Commentaries (for /(Raw|z|HREF)Com4?/)
Lexicons / Dictionaries (for /(Raw|z)LD4?/
Generic Books (for RawGenBook)

 
LCSH <tree/string>

Library of Congress Subject Heading. You may search the Library of Congress catalog or use it as a guide for determining an appropriate LCSH for books that are not in the Library of Congress.

   
Lang <xml:lang identifier>

This is the primary language code of the module and should include a value according to BCP 47 (i.e. RFC 4646 & RFC 4647). When available use a 2-letter code from ISO 639-1 codes (registrar), (e.g. en for English). If there is none for the given language, use an ISO 639-2/T code (e.g. ceb for Cebuano) (registrar). Failing that, use ISO 639-3 (registrar), which covers over 7000 languages, or ISO 639-5 (registrar) for macrolanguages. The regex for this subtag will be /[a-z]{2,3}/.

If a text is script-specific, such as a Latin vs. Cyrillic Serbian Bible or a Bible transliterated into other than its native script, include the ISO 15924 script code (registrar) after the language code (e.g. sr-Latn for Latin script Serbian, sr-Cyrl for Cyrillic script Serbian). The regex for this subtag will be /[A-Z][a-z]{3}/.

If a text is region (country)-specific, such as the Anglicized NIV, include the ISO 3166-1 region code (registrar) after the script code (or language code if no country code is present) (e.g. en-GB for UK English). The regex for this subtag will be /[A-Z]{2}/

Individual subtags (language, script, and region) are always separated by a hyphen. Identifiers should be as basic and succinct as possible. A script should not be specified for a language written in its expected script, unless the language has multiple common scripts (as in the case of Serbian above). A region should not be specified unless a text should be categorized separately from others texts in that language that do not specify a region. Private use extensions defined by BCP 47 (e.g. x-, qaa, and Qaaa) should be avoided wherever possible.

en  
InstallSize <integer (indicating bytes)>    
SwordVersionDate <ISO date string (yyyy-mm-dd)>

Indicates the date that the module was changed.

   
Obsoletes <name of module>

Each instance of this element names a module that is made obsolete by this module, usually indicated by the former name of the module.

  Repeats

Copyright & Licensing related elements

Element Values (type or enumerated) Default Value Allows
Copyright <string>

Contains the copyright notice for the work, including the year of copyright and the owner of the copyright.

  Continuation
CopyrightHolder <string>

Contains the name of the copyright holder.

   
CopyrightDate <integer (indicating year)>    
CopyrightNotes <string>   Continuation
CopyrightContactName <string>

Contains the name of the copyright holder.

  Continuation
CopyrightContactNotes <string>   Continuation
CopyrightContactAddress <string>

Contains the mailing address of the copyright holder.

  Continuation
CopyrightContactEmail <string>

Contains the email address of the copyright holder, preferably in the form:
name at xyz dot com.

   
ShortPromo <string>

A link to the home page for the module, perhaps with an encouragement to visit the site.

  HTML Link
ShortCopyright <string>    
DistributionLicense Public Domain
Copyrighted
Copyrighted; Permission to distribute granted to CrossWire
Copyrighted; Free non-commercial distribution
Copyrighted; Freely distributable
Copyrighted; Permission granted to distribute non-commercially in SWORD format
GFDL
GPL
Creative Commons: by-nc-nd
Creative Commons: by-nc-sa
Creative Commons: by-nc
Creative Commons: by-nd
Creative Commons: by-sa
Creative Commons: by

Use one of these strings verbatim. The actual copyright and/or license information is held in other elements. The last six licenses are Creative Commons licenses.

   
DistributionNotes <string>

Indicates any additional notes about distribution of the module.

  Continuation
TextSource <string, probably a URL>

Indicates, either in prose (such as "CCEL") or as a URL of the source of the text

  Continuation
UnlockURL <string>

Contains the URL (a bare URL, not an HTML <a> link) of a web page for unlocking instructions/payment

  URL

Localization

Where it makes sense, the values in the .conf file may be internationalized by appending _lang where lang is replaced by an appropriate code, according to BCP 47. See Lang above for details.

For example, to give a French description, you can have a field:

Description_fr=....

In order to distinguish a regional form from the primary form of a language, e.g. Brazilian Portuguese vs. the Portuguese of Portugal, then append the country code as in:

Description_pt-BR=....

Script variants can be given as in:

Description_zh_Hans=.... simplified Chinese ....
Description_zh_Hant=.... traditional Chinese ....

The language for .conf entries without the locale modifier is the default and must be the language of the module itself (as specified in Lang=) or English.

Notes:

  • At the present, this is only a planned feature. Module .confs can & should make use of this facility, but at the moment, there is no SWORD library or front end support for it.
  • See also Localized Language Names.