Difference between revisions of "Converting SFM Bibles to OSIS"

From CrossWire Bible Society
Jump to: navigation, search
m (Preparing (U)SFM files for conversion: -/)
(Using SFMToOSIS)
Line 35: Line 35:
 
===Using SFMToOSIS===
 
===Using SFMToOSIS===
  
[http://www.virtualstorehouse.org/downloads.html SFMToOSIS] is a robust, but somewhat difficult to setup and use, program produced by [http://www.snowfallsoftware.com/ Snowfall Software]. The program requires that you install a [http://www.python.org/ Python] interpreter and that the interpreter be within the system path. The program can also convert OSIS files back to SFM. SFMToOSIS more robust than usfm2osis.pl and more likely to produce valid OSIS files automatically.
+
[http://www.virtualstorehouse.org/index.php/scripture-preservation-tool.html SFMToOSIS] is a robust, but somewhat difficult to setup and use, program produced by [http://www.snowfallsoftware.com/ Snowfall Software]. The program requires that you install a [http://www.python.org/ Python] interpreter and that the interpreter be within the system path. The program can also convert OSIS files back to SFM. SFMToOSIS more robust than usfm2osis.pl and more likely to produce valid OSIS files automatically.
  
 
The program also requires a Paratext .ssf file. If you do not have such a file, you can use the following sample and adjust it to the specifics of your own text:
 
The program also requires a Paratext .ssf file. If you do not have such a file, you can use the following sample and adjust it to the specifics of your own text:

Revision as of 08:13, 1 May 2010

Introduction

Standard Format Markers (SFM) and its more standardized derivative USFM have been used for decades to store Bibles for printing and display in programs like UBS Paratext. The format is popular among Bible translation agencies and Bible societies. The basic format of SFM is simply plaintext with backslash(\) codes. For example, a new Bible verse is signaled by \v followed by the number of the verse.

Older texts in various dialects of SFM can still be found. It was common for various agencies, Bible societies, and even regional offices of such groups to have their own SFM standards. Unified Standard Format Markers (USFM) was developed to standardize SFM and encourage interoperability so that Bibles from one agency could be reasonably expected to operate with the software and stylesheets employed by another. The current version of USFM is 2.2, defined at http://confluence.ubs-icap.org/display/USFM/Home.

Preparing (U)SFM files for conversion

The simplicity of writing SFM also makes it easy to write poor SFM that fails to correspond to any kind of standard. The first task in preparing to convert SFM files to OSIS is to clean the text. The more regular your source files are, the more likely the conversion process will operate correctly.

One method of cleaning up your files is to import them into an SFM editor such as Bibledit (which runs on Linux, Mac OS X, and Windows) or SIL FieldWorks Translation Editor (which runs on Windows). The editors will frequently perform some basic corrections to the SFM syntax, but Bibledit in particular can perform a number of checks to correct specific errors common to SFM.

Checking USFM files for versification issues

Rather than waiting until you have the end result, a SWORD module, and then running the general utility emptyvss, it is possible to use another Windows based utility called GoBibleCreator USFM Preprocessor. Despite its name, its use is not limited to conversion of documents for use towards making Go Bible applications. Although this was originally developed for supporting the Go Bible project, it does have some useful more general features. This is one of them, and is found under the "Check for Consistency" tab. Another is the ability to export the USFM Bible into BQ/DigiStudy format. The Search for Versification Issues is particularly helpful for Bibles structured primarily as "verse per line", rather than as paragraphs containing a verse range. Another useful feature is the identification of non-standard SF markers.

Converting USFM files to OSIS

There exist two publicly distributed programs capable of converting USFM files to OSIS: usfm2osis.pl and SFMToOSIS. If you have the time, ability, and inclination, you may want to try both programs and see which one works best for you.

Using usfm2osis.pl

usfm2osis.pl is a simple Perl script intended only for converting USFM files to OSIS. usfm2osis.pl was written by CrossWire, so its OSIS output is geared towards the use of OSIS documents in modules for The SWORD Project. usfm2osis.pl is actively maintained by CrossWire, and bug reports and feature requests are welcomed at sword-support.

usfm2osis.pl requires a Perl interpreter in the system path. Then you can run:

perl usfm2osis.pl <osisWork> [-o OSIS-file] [-e USFM encoding] <USFM filenames|wildcard>

osisWork should be a value such as Bible.en.WEB.2007.

If you include an OSIS-file value, the output will be written there. Otherwise, it will be written to a file name based on your osisWork.

The USFM encoding argument should indicate the character encoding found in the source files. If none is give, utf8 is the default. The list of available encodings depends on your system. Executing the script with no arguments will print the list (as will executing it with an invalid encoding value).

The final argument is a list of filenames or a wildcard value such as *.sfm containing the SFM data.

Using SFMToOSIS

SFMToOSIS is a robust, but somewhat difficult to setup and use, program produced by Snowfall Software. The program requires that you install a Python interpreter and that the interpreter be within the system path. The program can also convert OSIS files back to SFM. SFMToOSIS more robust than usfm2osis.pl and more likely to produce valid OSIS files automatically.

The program also requires a Paratext .ssf file. If you do not have such a file, you can use the following sample and adjust it to the specifics of your own text:

<ScriptureText>
<BooksPresent>111111111111111111111111111111111111111111111111111111111111111111000000000000000000000000000000000</BooksPresent>
<Encoding>UTF-8</Encoding>
<ChapterMarker>c</ChapterMarker>
<Copyright></Copyright>
<FileNameForm>41MAT</FileNameForm>
<FileNamePostPart>.SFM</FileNamePostPart>
<FileNamePrePart></FileNamePrePart>
<FullName>The Bible in English</FullName>
<Language>ENGLISH</Language>
<LeftToRight>T</LeftToRight>
<Name>EN</Name>
<VerseMarker>v</VerseMarker>
<Versification>4</Versification>
</ScriptureText>

Next, update the run.bat file that came with SFMToOSIS to point to your SFM files and SSF file. Then run run.bat.

Importing OSIS files into SWORD

Before you import your OSIS files to SWORD format, you should check that it is valid OSIS. (And before you submit any files to modules@crosswire.org, you must ensure that your files are valid OSIS. Invalid OSIS files will not be accepted.) See OSIS Bible validation for further instructions on OSIS validation.

Instructions for running osis2mod are available at osis2mod usage.